HBA-CAM2 Hydrastar Brake Actuator Control Adaptor Module GEN-2

Product Specifications:

PSI: 1,600
Brake Type: Disc
Application: Makes Gen 5 and 6 and newer HydraStar electric-hydraulic brake actuators compatible with the following OEM brake controllers ◦Ford factory controller (2007 - 2008) ◦GM/Chevrolet/Factory (2007 - 2013)
Description: Controller adaptor module for factory installed 2005 and up Ford, GM, Dodge, some aftermarket brake controllers and Tekonsha Prodigy Controllers.
Note: The HBA-CAM is intended only for use with the GEN5 or later Carlisle HydraStar products. Wiring the HBA-CAM or higher to an older version HydraStar will damage the HBA-CAM. The HydraStar has 4 wires and a bleeder fitting on top. If your HydraStar does not have these features, do not attach the HBA-CAM.
Ref: 247637

GEN5 HydraStar actuators were manufactured between 2003-2006. You may identify a GEN5 unit by the serial number located on the HydraStar label. Later models can be identified by serial number.

Gen 5
Model Serial Number
HBA-10 300100 to 313799
HBA-12 700100 to 705699
HBA-16 500100 to 506099

Gen 6 or Later
Model Serial Number
HBA-10 313800 or higher
HBA-12 705700 or higher
HBA-16 506100 or higher